In this stunning Remuera House, a High-end residential team: Lindesay construction and Daniel Marshall Architects worked with the CS Project team to create some stunning examples of cavity slider installations. The first challenge was to divide a five-and-a-half-meter wide living and dining area into two functional rooms, without compromising on space when the rooms were open as one. CS FOR DOORS supplied a 2.9m high x 5.6m wide OvertakingDoors Cavity Slider with flush aluminum AluTec doors as a large room divider. The Alutecs were used to ensure the durability of the large 38mm door panels which were 2800mm x 2900mm each. When not in use, the space is completely open and the Full-Height detail gives it a more spacious feeling.
CS has also provided a ManualPivot door system as the statement entrance for this spectacular home. The 4.1m high x 1.2m wide door was manufactured in the CS Auckland Factory and finished in a custom colour to match the design of the house. Because of our high-performance hardware, the pivot door operates smoothly even though it is much taller and heavier than a traditional door.
The team at Lindesay were so impressed with the AluTec doors that they engaged CS to replace two alternative manufacturer's timber doors (2600mm x 1200mm) already installed on the project. The original doors bowed due to strong sunlight hitting one side of the door and creating a temperature difference. The AluTec door is constructed entirely of aluminum, reducing the risk of bow or warp due to varying temperatures.
Architect: Daniel Marshall Architects
Contractor: Lindesay Construction